Why Faux Fur Blankets Shed and How to Stop It
By Bedsure | Blankets, Sheets, Comforters & Heated Throws | Published: 2026-10-26
Category: Tips & Care
Learn why your faux fur blanket sheds and get practical steps to reduce shedding. Includes care tips for ruched and double-sided faux fur throws.
Quick answer
Shedding usually happens because loose fibers aren't removed before first use or because the blanket is washed too aggressively. A gentle initial shake, a vinegar rinse, and proper washing can reduce shedding significantly.
Why faux fur sheds
Faux fur is made from synthetic fibers that are tufted or woven into a backing. During manufacturing and shipping, loose fibers can remain on the surface. Shedding is normal at first, but excessive shedding may indicate the fibers are being pulled out by friction, heat, or harsh detergents.
The construction of the blanket matters. A double-sided faux fur blanket, like the Double-sided Faux Fur Ruched Blanket, has fibers on both sides, so it may shed a bit more initially than a single-sided version. The ruched texture can also trap loose fibers that release over time.
When shedding is a sign of poor quality
If shedding continues after several washes and gentle handling, the blanket may have a low fiber density or poor tufting. In that case, no amount of care will fully stop it. At that point, consider replacing the blanket with a higher-quality option like the Double-sided Faux Fur Ruched Blanket, which uses a dense 450gsm faux rabbit fur that is less prone to shedding.
How to stop shedding: a step-by-step diagnosis
- Symptom: You see loose fibers on your hands, clothes, or furniture after using the blanket.
- Likely cause: Loose fibers from manufacturing or shipping that haven't been removed yet. Or, the blanket has been washed with harsh detergents, high heat, or rough agitation.
- Corrective action 1: Initial shake and air: Take the blanket outside and shake it vigorously to dislodge loose fibers. Then, let it air out for a few hours. This alone can remove most of the initial shedding. If shedding continues after shaking, move to the next step.
- Corrective action 2: Vinegar rinse wash: Wash the blanket on a gentle cycle with cold water and a mild detergent. Add 1/2 cup of white vinegar to the rinse cycle. The vinegar helps set the fibers and reduces static, which can pull fibers out. Do not use fabric softener; it can loosen the fibers. After washing, air dry or tumble dry on low heat. Do not wring or twist.
- Stop or replace: If shedding is still heavy after two washes and gentle handling, the blanket may have a manufacturing defect or low-quality construction. At this point, stop trying to fix it and consider replacing it with a denser, better-constructed faux fur blanket. Look for a blanket with a high GSM (like 450gsm) and OEKO-TEX certification, which indicates better quality control.
Product facts
- Double-sided Faux Fur Ruched Blanket: Double-sided 450gsm faux rabbit fur offers plush warmth and is cruelty‑free. A higher GSM (grams per square meter) means denser fibers that are less likely to shed compared to thinner, cheaper faux fur.
Double-sided Faux Fur Ruched Blanket
